Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).
Volume level for oscillator 2 is manually set to 255.
Tone for oscillator 2 is manually set to 63.
Amplification level is set to -2.12dB (140) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 100.
Oscillators 1 range is 8'.
Oscillators 2 range is 4'.
High-pass filter cut-off frequency is manually set to 42.7Hz (42).
Low-pass filter cut-off frequency is set to 617.75Hz (107) and is modulated by Mod Wheel, Note Vel, VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 133.
Low-pass filter envelope amount is modulated by Note Vel, Mod Wheel.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Mod Wheel mod-matrix 1 modulation amount for low-pass filter envelope amount is 127.
Filter resonance is set to 32 and is modulated by Mod Wheel.
Mod Wheel mod-matrix 2 modulation amount for filter resonance is 67.
Unison detune level is manually set to ±8 cents (41).
Oscillators drift level is manually set to 36. Drift rate is 0
Oscillator 1 pitch is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 1 pitch is 14.
Oscillator 2 pitch is set to 0 semitones and is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 2 pitch is 10.
FX mode is set to Send, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 68.
not yet complete
not yet complete
not yet complete
not yet complete
Controls VCF Envelope, VCF Cut-off Frequency, VCF Resonance, Reverse Reverb Param 5.
function | type | destination | amount |
---|---|---|---|
timbre | matrix | VCF Envelope | 127 |
timbre | fader-indirect | VCF Cut-off Frequency | 133 |
timbre | matrix | VCF Resonance | 67 |
fx | matrix | Reverse Reverb Param 5 | 0 |
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
function | type | destination | amount |
---|---|---|---|
timbre | fader-indirect | VCF Cut-off Frequency | 133 |
menu | VCF Envelope Velocity Sensitivity | 128 | |
menu | VCA Envelope Velocity Sensitivity | 100 |
Controls OSC 1 Pitch, OSC 2 Pitch.
function | type | destination | amount |
---|---|---|---|
pitch | fader | OSC 1 Pitch | 14 |
pitch | fader | OSC 2 Pitch | 10 |
name | value |
---|---|
LFO 1 Rate | 3.84Hz (157) |
LFO 1 Delay / Fade | 1.99s (77) |
LFO 1 Shape | Triangle |
LFO 1 Key Sync | off |
LFO 1 Arp Sync | off |
LFO 1 Mono Mode | 0 |
LFO 1 Slew Rate | 0 |
Controls VCA Gain for All Voices.
function | type | destination | amount |
---|---|---|---|
volume | menu | VCA Gain for All Voices | 255 |
name | value |
---|---|
VCA Envelope Attack Time | 0s (0) |
VCA Envelope Decay Time | 3.89s (176) |
VCA Envelope Sustain Level | 0% (0) |
VCA Envelope Release Time | 1.26s (137) |
VCA Envelope Trigger Mode | Key (0) |
VCA Envelope Attack Curve | 0 |
VCA Envelope Decay Curve | 0 |
VCA Envelope Sustain Curve | 0 |
VCA Envelope Attack Curve | 0 |
Controls VCF Cut-off Frequency.
function | type | destination | amount |
---|---|---|---|
timbre | fader | VCF Cut-off Frequency | 133 |
name | value |
---|---|
VCF Envelope Attack Time | 0s (0) |
VCF Envelope Decay Time | 0.47s (80) |
VCF Envelope Sustain Level | 0% (0) |
VCF Envelope Release Time | 0s (0) |
VCF Envelope Trigger Mode | Key (0) |
VCF Envelope Attack Curve | 183 |
VCF Envelope Decay Curve | 103 |
VCF Envelope Sustain Curve | 39 |
VCF Envelope Attack Curve | 255 |